Skip to content
odmvn

Home / Guides

What an ODM Project Costs: Design, Tooling and First Production Run

ODM Vietnam editorial team · 30 October 2026

Key points
  • An ODM project budget has six main buckets: design and engineering, samples, tooling, production, quality control and landed-cost items such as freight and duties.
  • Tooling is usually the largest one-time cost, and ranges from a few hundred dollars for sewing patterns to tens of thousands for hardened steel injection molds.
  • Unit price depends mostly on materials, labor content, order quantity and finish, so the first run is often priced higher than repeat orders.
  • Typical payment terms are 30% deposit and 70% before shipment, with tooling often paid separately and up front.

“How much will it cost?” is usually the first question a brand asks and the hardest one for a factory to answer from a short message. An ODM project is not a single price. It is a set of one-time costs to develop and tool the product, followed by a per-unit cost that depends on volume, materials and finish, plus the costs of getting goods from the factory gate to your warehouse.

Understanding these buckets helps in two ways. You can set a realistic budget before contacting factories, and you can compare quotes properly. A quote that looks cheap on unit price may hide tooling charges, sample fees or quality risks that appear later. A quote that looks expensive may include design work and tooling ownership that another factory charges separately.

This article breaks down the typical cost structure of an ODM project in Vietnam, gives indicative ranges for tooling by process, explains what drives unit price and outlines common payment terms. All figures are indicative market ranges for planning, not quotes.

The six cost buckets

Every ODM project budget can be split into the same categories. Some appear once, some repeat with every order.

Cost bucket When it is paid Typical range or basis (indicative) Notes
Design and engineering Before or during development Often $0-5,000; can be absorbed into unit price Depends on how much is new vs adapted
Samples and prototypes Each sample round $50-1,500 per round, plus courier Often credited against first order
Tooling Before production $300 to $60,000+ depending on process Largest one-time cost for molded items
Production (unit price x quantity) Deposit plus balance Quoted FOB per unit Falls with volume and repeat orders
Quality control and testing Before shipment Around $250-450 per inspection day; lab tests extra Usually arranged and paid by buyer
Freight, duties and landed cost After shipment Depends on route, volume and HS code Buyer’s side under FOB terms

The sections below cover each bucket in more detail. For the overall project flow these costs sit within, see our guide to ODM manufacturing in Vietnam.

Design and engineering fees

Design cost depends on how far the final product is from something the factory already makes.

  • Adapting an existing base product (new colors, materials, minor dimensions, your logo): often free or a small fee, because the engineering already exists.
  • Significant redesign of an existing product (new features, new form, new mechanism): commonly a design fee in the low thousands of dollars, or an agreement to recover the cost through the unit price.
  • New product development from a brief: higher fees, and in some cases a condition that the buyer commits to a minimum first order.

Whether you pay a design fee also affects ownership. Factories are more willing to transfer design rights or grant exclusivity when the development work is paid separately. If you are still deciding between ODM and building to your own design, our comparison of ODM vs OEM vs contract manufacturing explains how the models differ on cost and ownership.

Samples and prototypes

Samples are cheap compared with the cost of a bad production run, so budget for at least two rounds. Indicative costs:

  • Soft goods: proto and fit samples often cost from $50 to a few hundred dollars per style.
  • Furniture and wood: a full sample piece can cost several hundred to over $1,000, depending on size and finish.
  • CNC parts: first-article parts are often charged at a prototype rate, higher per unit than production.
  • Molded products: 3D-printed or soft-tooled prototypes before hard tooling, from a few hundred dollars upward.

Courier costs from Vietnam to the US, EU or Japan add to each round, especially for bulky items. Many factories credit sample fees against the first production order; ask about this in advance.

Tooling costs by process

Tooling is the bucket with the widest range and the most negotiation. The process determines the cost.

Process Typical tooling Indicative cost range Typical life and notes
Injection molding, soft tooling Aluminum or mild steel mold $2,000-10,000 per mold Suited to pilot runs, lower shot life
Injection molding, production Hardened steel mold $8,000-60,000+ per mold Long life; cost rises with size, cavities, slides
Cut-and-sew soft goods Patterns and grading $100-800 per style Low cost; changes are easy
CNC machining Fixtures and programming $200-3,000 per part family Often included for simpler parts
Wood and furniture Jigs, templates, CNC programs $300-3,000 per item Custom profiles or bending add cost
Ceramic and molded home goods Plaster or master molds $200-2,000 per design Molds wear and need replacing
Electronics assembly Test fixtures, jigs $500-5,000 Depends on test coverage required

Three points to settle in writing before paying for tooling:

  1. Ownership. If you pay for the tooling, the contract should say it belongs to you, and on what terms you can move it to another factory.
  2. Amortization. Some factories reduce or waive the up-front tooling charge in exchange for a higher unit price over an agreed volume. This can help cash flow but often weakens your ownership claim.
  3. Maintenance and life. Ask how many shots or cycles the tooling is designed for and who pays for repair or replacement.

The tooling cost is also the main reason why injection-molded products usually need MOQs of 1,000-3,000 units, while CNC parts and small hardware can start around 100 and soft goods at 300-500 units per style.

Send a brief Send your brief

What drives the unit price

Once tooling is in place, the per-unit price is shaped by a handful of factors:

  • Materials. Often the largest share of unit cost. Timber species and grade, fabric type, resin grade, metal alloy and finish all matter. Imported materials add cost and lead time.
  • Labor content. Handwork such as rattan weaving, hand-finishing or complex sewing increases cost more than automated processes.
  • Order quantity. Setup time is spread over more units in larger orders. First runs are often priced higher than repeat orders.
  • Tolerances and finish. Tight machining tolerances, high-gloss finishes or complex coatings raise cost and reject rates.
  • Packaging. Custom retail boxes, inserts and printed materials can be a meaningful share of unit cost for small consumer products.
  • Components. Electronics, hardware and trims bought from third parties carry their own minimums and price breaks.

When comparing quotes, ask each factory to break down the unit price into materials, labor and packaging where possible. It shows where savings are realistic.

Quality control and inspection

QC arrangements are agreed between buyer and factory. Most buyers budget for at least one pre-shipment inspection by an independent inspection company, based on an AQL sampling plan. As an indicative range, a man-day of inspection in Vietnam often costs a few hundred dollars. Larger orders or complex products may need in-line inspections during production as well.

Lab testing is a separate cost and depends on your market: chemical restrictions, food contact, flammability or electrical safety tests can run from a few hundred to a few thousand dollars per product. Plan these tests before production, not after goods are packed.

Freight, duties and landed cost

Most Vietnamese factories quote FOB, usually from Cat Lai port in Ho Chi Minh City or Hai Phong in the north. Under FOB, the factory delivers goods loaded on the vessel; you pay ocean freight, insurance, destination charges, duties and inland delivery.

To estimate landed cost, add to the FOB price:

  • Ocean freight per container or per cubic meter for less-than-container loads. Rates move with the market, so get current quotes from a freight forwarder.
  • Import duties based on the product’s HS code and your market’s tariff schedule. Check the correct classification early, because duty rates differ widely between similar products.
  • Customs brokerage, port charges and inland delivery.
  • Insurance on the cargo value.

For bulky goods like furniture, freight can be a large share of landed cost, which makes packaging design and flat-pack options worth discussing with the factory.

Typical payment terms

Payment terms are agreed directly between buyer and factory. Common patterns in Vietnam:

  • Production orders: 30% deposit on order confirmation, 70% balance before shipment, often after a satisfactory pre-shipment inspection.
  • Tooling: frequently paid separately and up front, sometimes 50% at start and 50% on approval of the first samples from the tool.
  • Samples: paid in advance.

Established relationships may move to balance against copy of the bill of lading, or to letters of credit for larger orders. Avoid paying 100% up front on a first order with a new supplier.

A simple budgeting approach

For a first ODM project, build a budget in three lines: one-time development (design, samples, tooling), first order (unit price x quantity, plus QC), and landed cost (freight, duties, delivery). Then add a contingency of 10-15% for an extra sample round or packaging changes. This gives you a realistic figure before you share your brief and a basis to compare factory quotes.

Each bucket is taken further, with a worked first budget and a quote checklist, in our guide to ODM manufacturing cost.

Next step

If you have a product and a rough budget, send your brief. We reply within 24 business hours and match you with up to 3 Vietnamese ODM factories that fit your category and volume, so you can compare quotes on the same cost buckets. Matching is free for buyers, and you deal with the factories directly.

Frequently asked questions

How much does an ODM project in Vietnam typically cost to start?

It depends on how new the product is and which process it uses. Adapting an existing factory product may need only sample fees and a small design charge. A new injection-molded product can require design fees, several sample rounds and hardened steel molds costing tens of thousands of dollars before the first order. Treat any figure as indicative until factories quote on a complete brief.

Who pays for tooling in an ODM project?

Usually the buyer, either up front or through a higher unit price over an agreed volume. Paying up front and documenting ownership in the contract gives you the clearest right to move the tooling later. When tooling is amortized into unit price, the factory often keeps ownership until the agreed volume is reached. Clarify this before paying.

What payment terms are common with Vietnamese ODM factories?

For production orders, a 30% deposit on confirmation and 70% balance before shipment is common, often released after a satisfactory pre-shipment inspection. Tooling is frequently paid separately and in advance, and samples are paid up front. Longer relationships may move to payment against bill of lading copy or letters of credit. Terms are agreed directly between buyer and factory.

Why is the first production run more expensive than later orders?

First runs carry setup time, learning on the production line, higher reject rates and often smaller quantities. Material purchases may also be below the supplier's best price breaks. As the product stabilizes and volumes grow, factories can usually lower the unit price. Ask each factory for pricing at your first order quantity and at your expected repeat volume.

Are sample costs refundable?

Sometimes. Many factories credit part or all of the sample fees against the first production order once it is confirmed. Others treat samples as a separate paid service, especially for complex or custom designs. Courier costs are almost always paid by the buyer. Ask about sample credit terms when you request the first quotation.